MINETOLA, PAOLO

MINETOLA, PAOLO  

Dipartimento di Ingegneria Gestionale e della Produzione  

012994  

Mostra records
Risultati 1 - 20 di 49 (tempo di esecuzione: 0.028 secondi).
Citazione Data di pubblicazione Autori File
An approach to evaluate the wear of customized manufacturing fixtures through the analysis of 3D scan data / Khandpur, M. S.; Minetola, P.; Stiuso, V.; Rifuggiato, S.; Fontana, L.; Lannunziata, E.; Giubilini, A.; Iuliano, L.. - In: MATERIALS TODAY: PROCEEDINGS. - ISSN 2214-7853. - ELETTRONICO. - (2023). (Intervento presentato al convegno Fourth International Conference on Recent Advances in Materials and Manufacturing 2022 tenutosi a Erode, Tamil Nadu (INDIA) nel 08-09/12/2022) [10.1016/j.matpr.2023.03.385]. 1-gen-2023 Khandpur M. S.Minetola P.Stiuso V.Rifuggiato S.Fontana L.Lannunziata E.Giubilini A.Iuliano L. 2023_An approach to evaluate the wear of customized manufacturing fixtures through the analysis of 3D scan data.pdf
Influence of Process Parameters on Compression Properties of 3D Printed Polyether-Ether-Ketone by Fused Filament Fabrication / Lannunziata, Erika; Giubilini, Alberto; Saboori, Abdollah; Minetola, Paolo. - ELETTRONICO. - 1:(2023), pp. 336-344. (Intervento presentato al convegno Flexible Automation and Intelligent Manufacturing: Establishing Bridges for More Sustainable Manufacturing Systems. FAIM 2023 tenutosi a Porto nel Giugno) [10.1007/978-3-031-38241-3_38]. 1-gen-2023 Lannunziata, ErikaGiubilini, AlbertoSaboori, AbdollahMinetola, Paolo -
An investigation of the influence of 3d printing defects on the tensile performance of ABS material / Rifuggiato, Serena; Minetola, Paolo; Stiuso, Vito; Khandpur, MANKIRAT SINGH; Fontana, Luca; Iuliano, Luca. - In: MATERIALS TODAY: PROCEEDINGS. - ISSN 2214-7853. - ELETTRONICO. - 57:(2022), pp. 851-858. (Intervento presentato al convegno Third International Conference on Aspects of Materials Science and Engineering (ICAMSE 2022) tenutosi a Chandigarh (India) nel 4-5 marzo 2022) [10.1016/j.matpr.2022.02.486]. 1-gen-2022 Serena RifuggiatoPaolo MinetolaVito StiusoMankirat Singh KhandpurLuca FontanaLuca Iuliano 2022 - ICAMSE Rifuggiato.pdf
An investigation of the influence of 3d printing parameters on the tensile strength of PLA material / Fontana, Luca; Minetola, Paolo; Iuliano, Luca; Rifuggiato, Serena; Khandpur, MANKIRAT SINGH; Stiuso, Vito. - In: MATERIALS TODAY: PROCEEDINGS. - ISSN 2214-7853. - ELETTRONICO. - 57:(2022), pp. 657-663. (Intervento presentato al convegno Third International Conference on Aspects of Materials Science and Engineering (ICAMSE 2022) tenutosi a Chandigarh (India) nel 4-5 marzo 2022) [10.1016/j.matpr.2022.02.078]. 1-gen-2022 Luca FontanaPaolo MinetolaLuca IulianoSerena RifuggiatoMankirat Singh KhandpurVito Stiuso 2022 - ICAMSE Fontana.pdf
Benchmarking analysis of digital light processing resins in terms of dimensional accuracy and geometric tolerances / Stiuso, V.; Minetola, P.; Giubilini, A.; Fontana, L.; Khandpur, M. S.; Rifuggiato, S.; Marchiandi, G.. - In: MATERIALS TODAY: PROCEEDINGS. - ISSN 2214-7853. - ELETTRONICO. - 62:(2022), pp. 6654-6662. (Intervento presentato al convegno International Conference on Advances in Materials, Mechanics, Mechatronics and Manufacturing (IC4M 2022) tenutosi a Madhya Pradesh (India) nel 9-10 aprile 2022) [10.1016/j.matpr.2022.04.658]. 1-gen-2022 Stiuso V.Minetola P.Giubilini A.Fontana L.Khandpur M. S.Rifuggiato S.Marchiandi G. 2022 - IC4M Stiuso.pdf
In-Situ Monitoring for Open Low-Cost 3d Printing / Minetola, P.; Khandpur, M. S.; Iuliano, L.; Calignano, F.; Galati, M.; Fontana, L.. - ELETTRONICO. - (2022), pp. 49-56. (Intervento presentato al convegno 10th International Conference on Manufacturing Engineering and Processes 2021 (ICMEP 2021) tenutosi a Singapore (Virtual) nel 11–14 marzo 2021) [10.1007/978-981-16-3934-0_7]. 1-gen-2022 Minetola P.Khandpur M. S.Iuliano L.Calignano F.Galati M.Fontana L. Printed version_Minetola_ICMT2021.pdf
Introducing sustainability themes in STEM education: evidences from some European countries / Antonelli, Dario; Minetola, Paolo; Priarone, PAOLO CLAUDIO; Maffei, Antonio; Lanzetta, Michele; Stadnicka, Dorota; Podržaj, Primož. - ELETTRONICO. - (2022), pp. 312-314. (Intervento presentato al convegno 4th International Conference on Higher Education Learning Methodologies and Technologies Online tenutosi a Palermo nel September 21-23, 2022). 1-gen-2022 Dario AntonelliPaolo MinetolaPaolo Claudio PriaroneMichele Lanzetta + abstract HELMETO 2022_Antonelli.pdf
Proposal of an Innovative Benchmark for the Evaluation of 3D Printing Accuracy for Photopolymers / Minetola, Paolo; de Freitas Pacheco, Vinicius; Massarani, Marcelo; Calignano, Flaviana; Marchiandi, Giovanni. - ELETTRONICO. - 1048:(2022), pp. 279-290. (Intervento presentato al convegno 3rd International Conference on Materials Science and Manufacturing Technology (ICMSMT 2021) tenutosi a Tamil Nadu, India nel 8-9 aprile 2021) [10.4028/www.scientific.net/MSF.1048.279]. 1-gen-2022 Minetola, PaoloCalignano, FlavianaMarchiandi, Giovanni + MSF.1048.279.pdfPre-print_MSF1048_Minetola.pdf
Quality and sustainability benchmarking of decentralized additive manufacturing processes / Maisano, Domenico A.; Verna, Elisa; Minetola, Paolo; Lunetto, Vincenzo; Priarone, PAOLO CLAUDIO. - ELETTRONICO. - (2022). (Intervento presentato al convegno AITeM 2021 - XV Convegno dell’Associazione Italiana Tecnologie Manifatturiere tenutosi a Milano (Italy) nel 17-19 January 2022). 1-gen-2022 Domenico A. MaisanoElisa VernaPaolo MinetolaVincenzo LunettoPaolo Claudio Priarone AITEM2021_Full_Paper_(Final_Version).pdf
Variability in Section Loss and Maximum Pit Depth of Corroded Prestressing Wires / Franceschini, Lorenzo; Vecchi, Francesca; Tondolo, Francesco; Belletti, Beatrice; Montero, Javier Sánchez; Minetola, Paolo. - ELETTRONICO. - (2022), pp. 491-498. (Intervento presentato al convegno 1st Conference of the European Association on Quality Control of Bridges and Structures (EUROSTRUCT 2021) tenutosi a Padova nel 29 agosto - 1 settembre 2021) [10.1007/978-3-030-91877-4_56]. 1-gen-2022 Vecchi, FrancescaTondolo, FrancescoBelletti, BeatriceMinetola, Paolo + Variability in Section Loss and Maximum Pit Depth of Corroded Prestressing Wires.pdfVariability in Section Loss and Maximum Pit Depth of Corroded Prestressing Wires_pre-print.pdf
Development of a low-cost monitoring system for open 3d printing / Khandpur, M S; Galati, M; Minetola, P; Marchiandi, G; Fontana, L; Stiuso, V. - In: IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. - ISSN 1757-8981. - ELETTRONICO. - 1136:(2021), p. 012044. (Intervento presentato al convegno International Conference on Advances in Materials, Mechanics, Mechatronics and Manufacturing (IC4M 2021) tenutosi a Madhya Pradesh, India nel 6th-7th March 2021) [10.1088/1757-899x/1136/1/012044]. 1-gen-2021 Khandpur, M SGalati, MMinetola, PMarchiandi, GFontana, LStiuso, V Khandpur_2021_IOP_Conf_Ser_Mater_Sci_Eng_1136_012044.pdf
Experimental assessment of compensated distortion in selective laser melting of Ti6Al4V parts / Stiuso, V; Minetola, P; Calignano, F; Galati, M; Khandpur, M S; Fontana, L. - In: IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. - ISSN 1757-8981. - ELETTRONICO. - 1136:(2021), p. 012048. (Intervento presentato al convegno International Conference on Advances in Materials, Mechanics, Mechatronics and Manufacturing (IC4M 2021) tenutosi a Madhya Pradesh, India nel 6th-7th March 2021) [10.1088/1757-899x/1136/1/012048]. 1-gen-2021 Stiuso, VMinetola, PCalignano, FGalati, MKhandpur, M SFontana, L Stiuso_2021_IOP_Conf_Ser_Mater_Sci_Eng_1136_012048.pdf
Experimental testing of 3D printed polymeric heat exchangers / Fontana, L; Minetola, P; Calignano, F; Iuliano, L; Khandpur, M S; Stiuso, V. - In: IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. - ISSN 1757-8981. - ELETTRONICO. - 1136:(2021), p. 012047. (Intervento presentato al convegno International Conference on Advances in Materials, Mechanics, Mechatronics and Manufacturing (IC4M 2021) tenutosi a Madhya Pradesh, India nel 6th-7th March 2021) [10.1088/1757-899x/1136/1/012047]. 1-gen-2021 Fontana, LMinetola, PCalignano, FIuliano, LKhandpur, M SStiuso, V Fontana_2021_IOP_Conf_Ser_Mater_Sci_Eng_1136_012047.pdf
Experimental validation of laser powder bed fusion simulation / Minetola, Paolo; Stiuso, Vito; Calignano, Flaviana; Galati, Manuela; Khandpur, Mankirat Singh; Fontana, Luca. - ELETTRONICO. - (2021), pp. 1-10. (Intervento presentato al convegno 3rd International Conference on Inventive Research in Material Science and Technology (ICIRMCT 2021) tenutosi a Coimbatore (India) nel 22-23 gennaio 2021) [10.1088/1757-899X/1091/1/012048]. 1-gen-2021 Minetola, PaoloStiuso, VitoCalignano, FlavianaGalati, ManuelaKhandpur, Mankirat SinghFontana, Luca Minetola_2021_IOP_Conf._Ser.__Mater._Sci._Eng._1091_012048.pdf
Mechanical Performance of Polylactic Acid from Sustainable Screw-Based 3D Printing / Minetola, Paolo; Fontana, Luca; Arrigo, Rossella; Malucelli, Giulio; Iuliano, Luca. - ELETTRONICO. - 200:(2021), pp. 531-542. (Intervento presentato al convegno Sustainable Design and Manufacturing 2020 (SDM2020) tenutosi a KES Virtual Conference Centre nel 9-11 settembre 2020) [10.1007/978-981-15-8131-1_47]. 1-gen-2021 Minetola, PaoloFontana, LucaArrigo, RossellaMalucelli, GiulioIuliano, Luca Articolo SDM2020_versione a stampa.pdfSDM2020-091_draft.pdf
Accuracy of down-facing surfaces in complex internal channels produced by laser powder bed fusion (L-PBF) / Calignano, F.; Iuliano, L.; Galati, M.; Minetola, P.; Marchiandi, G.. - 88:(2020), pp. 423-426. (Intervento presentato al convegno 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2019 tenutosi a ita nel 2019) [10.1016/j.procir.2020.05.073]. 1-gen-2020 Calignano F.Iuliano L.Galati M.Minetola P.Marchiandi G. 1-s2.0-S2212827120303942-main.pdf
Comparison of dimensional tolerance grades for metal AM processes / Minetola, Paolo; Galati, Manuela; Calignano, Flaviana; Iuliano, Luca; Rizza, Giovanni; Fontana, Luca. - ELETTRONICO. - 88:(2020), pp. 399-404. (Intervento presentato al convegno 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME '19 tenutosi a Ischia (NA), Gulf of Naples, Italy nel 17-19 July 2019) [https://doi.org/10.1016/j.procir.2020.05.069]. 1-gen-2020 Minetola, PaoloGalati, ManuelaCalignano, FlavianaIuliano, LucaRizza, GiovanniFontana, Luca ICME 2019 - Benchmarking Metal AM.pdf
Ti-6Al-4V lattice structures produced by EBM: Heat treatment and mechanical properties / Galati, M.; Saboori, A.; Biamino, S.; Calignano, F.; Lombardi, M.; Marchiandi, G.; Minetola, P.; Fino, P.; Iuliano, L.. - 88:(2020), pp. 411-416. (Intervento presentato al convegno 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2019 tenutosi a ita nel 2019) [10.1016/j.procir.2020.05.071]. 1-gen-2020 Galati M.Saboori A.Biamino S.Calignano F.Lombardi M.Marchiandi G.Minetola P.Fino P.Iuliano L. 1-s2.0-S2212827120303905-main.pdf
A methodology for evaluating the aesthetic quality of 3D printed parts / Galati, M.; Minetola, P.; Marchiandi, G.; Atzeni, E.; Calignano, F.; Salmi, A.; Iuliano, L.. - 79:(2019), pp. 95-100. (Intervento presentato al convegno 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME 2018) tenutosi a Ischia (NA) nel 18-20 July 2018) [10.1016/j.procir.2019.02.018]. 1-gen-2019 Galati M.Minetola P.Marchiandi G.Atzeni E.Calignano F.Salmi A.Iuliano L. 1-s2.0-S2212827119301325-main.pdf
Comparison of dimensional tolerance grades of AM systems / Minetola, P.; Calignano, F.; Iuliano, L.. - ELETTRONICO. - (2019), pp. 1-10. (Intervento presentato al convegno 14th A.I.Te.M. Conference – AITEM 2019 tenutosi a Padova nel 9-11 settembre 2019). 1-gen-2019 Minetola P.Calignano F.Iuliano L. -