Archivio Istituzionale della RicercaBARATTA, MIRKO
BARATTA, MIRKO
Dipartimento Energia
003155
Evaluation of NOx Emissions Associated to Non-Premixed Combustion of H2/Natural Gas Blends in a 40MW Heavy-Duty Gas Turbine
2023 Carusotto, Salvatore; Salvadori, Simone; Baratta, Mirko; Misul, Daniela; Labrini, Giovanni; Cardile, Francesco; Toppino, Marco; Valsania, Massimo
Analysis of the Cooling Performance of a Cylindrical Hole Designed for the Suction Side of the LS89 Vane under Transitional Conditions
2021 Rosafio, N.; Bruno, A.; Salvadori, S.; Misul, D.; Baratta, M.
Effect of self-sustained pulsation of coolant flow on adiabatic effectiveness and net heat flux reduction on a flat plate
2021 Rosafio, N.; Salvadori, S.; Misul, D. A.; Baratta, M.; Carnevale, M.; Saumweber, C.
Redesign of the TG20 Heavy-Duty Gas Turbine to Increase Turbine Inlet Temperature and Global Efficiency
2020 Baratta, Mirko; Cardile, Francesco; Misul, DANIELA ANNA; Rosafio, Nicola; Salvadori, Simone
Experimental and Numerical Analysis of Diluted Combustion in a Direct Injection CNG Engine Featuring Post- Euro-VI Fuel Consumption Targets
2018 Baratta, Mirko; Misul, Daniela; Goel, Prashant; Laurenzano, Danilo; Lecointe, Betrand; Rouleau, Loic; Ravet, Frederic; Christou, Panagiotis
Influence of Different Compositions of Natural Gas on Engine Performance
2015 Baratta, Mirko; D'Ambrosio, Stefano; Iemmolo, Daniele; Misul, DANIELA ANNA
Fluid-Dynamic Modeling and Advanced Control Strategies for a Gaseous-Fuel Injection System
2014 Misul, DANIELA ANNA; Baratta, Mirko; Kheshtinejad, Hamed
Potential of the variable valve actuation (VVA) strategy on a heavy duty CNG engine
2014 Baratta, Mirko; Finesso, Roberto; Misul, DANIELA ANNA; Spessa, Ezio; Tong, Yifei; Peletto, C.
Performance and Emissions of a Turbocharged Spark Ignition Engine Fuelled with CNG and CNG/Hydrogen Blends
2013 Baratta, Mirko; D'Ambrosio, Stefano; Misul, DANIELA ANNA
DI-CNG injector characterization at small energizing times by means of numerical simulation
2012 Baratta, Mirko; Catania, Andrea; Rapetto, Nicola; Fuerhapter, A.; Gerlich, M.; Zoels, W.
Effects of H2 addition to CNG blends on cycle-to-cycle and cylinder-to-cylinder combustion variation in an SI engine
2012 Baratta, Mirko; D'Ambrosio, Stefano; Misul, DANIELA ANNA; Spessa, Ezio
Fluid-dynamic characterization of a CNG injection system
2012 Baratta, Mirko; Misul, DANIELA ANNA; Spessa, Ezio; Gazzilli, G.; Gerini, A.
Numerical and experimental analysis of mixture formation and performance in a direct injection CNG engine
2012 Baratta, Mirko; Rapetto, Nicola; Spessa, Ezio; Fuerhapter, A.; Philipp, H.
Multizone diagnostic tools for combustion and emission formation processes in SI and CI engines
2011 Baratta, Mirko; Catania, Andrea; D'Ambrosio, Stefano; Ferrari, Alessandro; Finesso, Roberto; Misul, DANIELA ANNA; Mittica, Antonio; Spessa, Ezio
CNG INJECTOR NOZZLE DESIGN AND FLOW PREDICTION
2010 Baratta, Mirko; Catania, Andrea; Pesce, F. C.
Computational and Experimental Analysis of Direct CNG Injection and Mixture Formation in a SI Research Engine
2010 Baratta, Mirko; Catania, Andrea; Pesce, F. C.
Potentiality assessment of CNG fuelling: cycle-by-cycle combustion characterization in SI engines by means of diagnostic analysis of in-cylinder pressure
2010 Baratta, Mirko; Catania, Andrea; D'Ambrosio, Stefano; Misul, DANIELA ANNA; Mittica, Antonio; Spessa, Ezio
Multidimensional Modeling of Natural GAs Jet and Mixture Formation in DI SI Engines - Development and Validation of a Virtual Injector Model
2009 Baratta, Mirko; Catania, Andrea; Pesce, FRANCESCO CONCETTO
Transient Numerical Analysis of a High Swirled Diesel Engine
2009 Baratta, Mirko; Catania, Andrea; Pesce, FRANCESCO CONCETTO; Spessa, Ezio; Rech, C; Zancanaro, F. V.; Vielmo, H. A.
Turbocharged CNG Engines for Urban Transportation: Evaluation of Turbolag Reduction Strategies by means of Computational Analyses
2009 Baratta, Mirko; Spessa, Ezio
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| Evaluation of NOx Emissions Associated to Non-Premixed Combustion of H2/Natural Gas Blends in a 40MW Heavy-Duty Gas Turbine / Carusotto, Salvatore; Salvadori, Simone; Baratta, Mirko; Misul, Daniela; Labrini, Giovanni; Cardile, Francesco; Toppino, Marco; Valsania, Massimo. - ELETTRONICO. - Volume 3B: Combustion, Fuels, and Emissions:(2023), pp. 1-12. (Intervento presentato al convegno ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition tenutosi a Boston, Massachusetts, USA nel June 26–30, 2023) [10.1115/GT2023-103822]. | 1-gen-2023 | Carusotto, SalvatoreSalvadori, SimoneBaratta, MirkoMisul, DanielaLabrini, GiovanniCardile, FrancescoToppino, Marco + | GT2023-103822_attendee.pdf |
| Analysis of the Cooling Performance of a Cylindrical Hole Designed for the Suction Side of the LS89 Vane under Transitional Conditions / Rosafio, N.; Bruno, A.; Salvadori, S.; Misul, D.; Baratta, M.. - ELETTRONICO. - (2021), pp. 1-13. (Intervento presentato al convegno 14th European Conference on Turbomachinery Fluid Dynamics and Thermodynamics, ETC 2021 tenutosi a Gdansk, Poland nel 2021) [https://doi.org/10.29008/ETC2021-646]. | 1-gen-2021 | Rosafio N.Salvadori S.Misul D.Baratta M. + | ETC2021-646.pdf |
| Effect of self-sustained pulsation of coolant flow on adiabatic effectiveness and net heat flux reduction on a flat plate / Rosafio, N.; Salvadori, S.; Misul, D. A.; Baratta, M.; Carnevale, M.; Saumweber, C.. - ELETTRONICO. - 5:(2021), pp. 1-12. (Intervento presentato al convegno ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition, GT 2021 nel 2021) [10.1115/GT2021-59663]. | 1-gen-2021 | Rosafio N.Salvadori S.Misul D. A.Baratta M. + | GT2021-59663_light.pdf |
| Redesign of the TG20 Heavy-Duty Gas Turbine to Increase Turbine Inlet Temperature and Global Efficiency / Baratta, Mirko; Cardile, Francesco; Misul, DANIELA ANNA; Rosafio, Nicola; Salvadori, Simone. - ELETTRONICO. - (2020), pp. 1-10. (Intervento presentato al convegno Asme Turbo Expo 2020 tenutosi a Virtuale nel September 21 – 25, 2020). | 1-gen-2020 | Mirko BarattaFrancesco CardileDaniela Anna MisulNicola RosafioSimone Salvadori | GT2020-15269_Attendee.pdf |
| Experimental and Numerical Analysis of Diluted Combustion in a Direct Injection CNG Engine Featuring Post- Euro-VI Fuel Consumption Targets / Baratta, Mirko; Misul, Daniela; Goel, Prashant; Laurenzano, Danilo; Lecointe, Betrand; Rouleau, Loic; Ravet, Frederic; Christou, Panagiotis. - In: SAE TECHNICAL PAPER. - ISSN 0148-7191. - 2018-:(2018). (Intervento presentato al convegno 2018 SAE World Congress Experience, WCX 2018 tenutosi a Cobo Center, usa nel 2018) [10.4271/2018-01-1142]. | 1-gen-2018 | Baratta, MirkoMisul, DanielaGOEL, PRASHANTLaurenzano, Danilo + | 2018-01-1142.pdf |
| Influence of Different Compositions of Natural Gas on Engine Performance / Baratta, Mirko; D'Ambrosio, Stefano; Iemmolo, Daniele; Misul, DANIELA ANNA. - (2015). (Intervento presentato al convegno ASME-ATI-UIT 2015 Conference on Thermal Energy Systems: Production, Storage, Utilization and the Environment tenutosi a Napoli nel 17 – 20 May, 2015). | 1-gen-2015 | BARATTA, MIRKOD'AMBROSIO, StefanoIEMMOLO, DANIELEMISUL, DANIELA ANNA | - |
| Fluid-Dynamic Modeling and Advanced Control Strategies for a Gaseous-Fuel Injection System / Misul, DANIELA ANNA; Baratta, Mirko; Kheshtinejad, Hamed. - ELETTRONICO. - (2014). (Intervento presentato al convegno SAE 2014 World Congress tenutosi a Detroit nel April 8-10, 2014) [10.4271/2014-01-1096]. | 1-gen-2014 | MISUL, DANIELA ANNABARATTA, MIRKOKHESHTINEJAD, HAMED | - |
| Potential of the variable valve actuation (VVA) strategy on a heavy duty CNG engine / Baratta, Mirko; Finesso, Roberto; Misul, DANIELA ANNA; Spessa, Ezio; Tong, Yifei; Peletto, C.. - ELETTRONICO. - (2014). (Intervento presentato al convegno ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2014 tenutosi a Copenhagen; Denmark nel 25 July 2014 through 27 July 2014) [10.1115/ESDA2014-20217]. | 1-gen-2014 | BARATTA, MIRKOFINESSO, ROBERTOMISUL, DANIELA ANNASPESSA, EZIOTONG, YIFEI + | - |
| Performance and Emissions of a Turbocharged Spark Ignition Engine Fuelled with CNG and CNG/Hydrogen Blends / Baratta, Mirko; D'Ambrosio, Stefano; Misul, DANIELA ANNA. - In: SAE TECHNICAL PAPER. - ISSN 0148-7191. - (2013). (Intervento presentato al convegno SAE 2013 World Congress tenutosi a Detroit, Michigan, USA nel April 16-18, 2013) [10.4271/2013-01-0866]. | 1-gen-2013 | BARATTA, MIRKOD'AMBROSIO, StefanoMISUL, DANIELA ANNA | - |
| DI-CNG injector characterization at small energizing times by means of numerical simulation / Baratta, Mirko; Catania, Andrea; Rapetto, Nicola; Fuerhapter, A.; Gerlich, M.; Zoels, W.. - (2012). (Intervento presentato al convegno 2012 Spring Technical Conference of the ASME Internal Combustion Engine Division tenutosi a Torino nel May 6-9, 2012). | 1-gen-2012 | BARATTA, MIRKOCATANIA, ANDREARAPETTO, NICOLA + | - |
| Effects of H2 addition to CNG blends on cycle-to-cycle and cylinder-to-cylinder combustion variation in an SI engine / Baratta, Mirko; D'Ambrosio, Stefano; Misul, DANIELA ANNA; Spessa, Ezio. - ELETTRONICO. - (2012), pp. 189-202. (Intervento presentato al convegno 2012 Spring Technical Conference of the ASME Internal Combustion Engine Division tenutosi a Torino (Italy) nel May 6-9, 2012) [10.1115/ICES2012-81187]. | 1-gen-2012 | BARATTA, MIRKOD'AMBROSIO, StefanoMISUL, DANIELA ANNASPESSA, EZIO | - |
| Fluid-dynamic characterization of a CNG injection system / Baratta, Mirko; Misul, DANIELA ANNA; Spessa, Ezio; Gazzilli, G.; Gerini, A.. - ELETTRONICO. - (2012). (Intervento presentato al convegno 2012 Spring Technical Conference of the ASME Internal Combustion Engine Division tenutosi a Torino (Italy) nel May 6-9, 2012). | 1-gen-2012 | BARATTA, MIRKOMISUL, DANIELA ANNASPESSA, EZIO + | - |
| Numerical and experimental analysis of mixture formation and performance in a direct injection CNG engine / Baratta, Mirko; Rapetto, Nicola; Spessa, Ezio; Fuerhapter, A.; Philipp, H.. - In: SAE TECHNICAL PAPER. - ISSN 0148-7191. - ELETTRONICO. - (2012), pp. 1-22. (Intervento presentato al convegno SAE 2012 World Congress & Exhibition tenutosi a Detroit (USA) nel April 24-26, 2012) [10.4271/2012-01-0401]. | 1-gen-2012 | BARATTA, MIRKORAPETTO, NICOLASPESSA, EZIO + | - |
| Multizone diagnostic tools for combustion and emission formation processes in SI and CI engines / Baratta, Mirko; Catania, Andrea; D'Ambrosio, Stefano; Ferrari, Alessandro; Finesso, Roberto; Misul, DANIELA ANNA; Mittica, Antonio; Spessa, Ezio. - ELETTRONICO. - (2011), pp. 1-11. (Intervento presentato al convegno 66° Congresso Nazionale ATI tenutosi a Rende (Cosenza) nel 5-9 Settembre 2011). | 1-gen-2011 | BARATTA, MIRKOCATANIA, ANDREAD'AMBROSIO, StefanoFERRARI, AlessandroFINESSO, ROBERTOMISUL, DANIELA ANNAMITTICA, AntonioSPESSA, EZIO | - |
| CNG INJECTOR NOZZLE DESIGN AND FLOW PREDICTION / Baratta, Mirko; Catania, Andrea; Pesce, F. C.. - (2010). (Intervento presentato al convegno ASME 2010 Internal Combustion Engine Division Fall Technical Conference tenutosi a San Antonio (TX) nel September 12-15, 2010). | 1-gen-2010 | BARATTA, MIRKOCATANIA, ANDREA + | - |
| Computational and Experimental Analysis of Direct CNG Injection and Mixture Formation in a SI Research Engine / Baratta, Mirko; Catania, Andrea; Pesce, F. C.. - ELETTRONICO. - (2010). (Intervento presentato al convegno ASME 2010 Internal Combustion Engine Division Fall Technical Conference tenutosi a San Antonio (TX) nel September 12-15, 2010). | 1-gen-2010 | BARATTA, MIRKOCATANIA, ANDREA + | - |
| Potentiality assessment of CNG fuelling: cycle-by-cycle combustion characterization in SI engines by means of diagnostic analysis of in-cylinder pressure / Baratta, Mirko; Catania, Andrea; D'Ambrosio, Stefano; Misul, DANIELA ANNA; Mittica, Antonio; Spessa, Ezio. - (2010), pp. 1-10. (Intervento presentato al convegno 65° congresso nazionale ATI tenutosi a Domus de Maria (CA) - Italia nel 13-17 settembre 2010). | 1-gen-2010 | BARATTA, MIRKOCATANIA, ANDREAD'AMBROSIO, StefanoMISUL, DANIELA ANNAMITTICA, AntonioSPESSA, EZIO | - |
| Multidimensional Modeling of Natural GAs Jet and Mixture Formation in DI SI Engines - Development and Validation of a Virtual Injector Model / Baratta, Mirko; Catania, Andrea; Pesce, FRANCESCO CONCETTO. - (2009). (Intervento presentato al convegno ASME tenutosi a MILWAUKEE, WISCONSIN, USA nel 3-6 maggio 2009). | 1-gen-2009 | BARATTA, MIRKOCATANIA, ANDREAPESCE, FRANCESCO CONCETTO | - |
| Transient Numerical Analysis of a High Swirled Diesel Engine / Baratta, Mirko; Catania, Andrea; Pesce, FRANCESCO CONCETTO; Spessa, Ezio; Rech, C; Zancanaro, F. V.; Vielmo, H. A.. - (2009). (Intervento presentato al convegno COBEM tenutosi a BRASILE). | 1-gen-2009 | BARATTA, MIRKOCATANIA, ANDREAPESCE, FRANCESCO CONCETTOSPESSA, EZIO + | - |
| Turbocharged CNG Engines for Urban Transportation: Evaluation of Turbolag Reduction Strategies by means of Computational Analyses / Baratta, Mirko; Spessa, Ezio. - (2009), pp. 1-10. (Intervento presentato al convegno 2009 Spring Technical Conference of ASME-ICED tenutosi a Milwaukee, Wisconsin, USA nel May 3-6, 2009) [10.1115/ICES2009-76067]. | 1-gen-2009 | BARATTA, MIRKOSPESSA, EZIO | - |