Archivio Istituzionale della RicercaUGUES, DANIELE
UGUES, DANIELE
Dipartimento Scienza Applicata e Tecnologia
003181
Characterization and validation of a miniaturized steelmaking process for the fabrication of hot work tool steel
In corso di stampa Zago, A; Ugues, Daniele; Rosso, M.
Parameters Optimization and Repeatability Study on Low-Weldable Nickel-Based Superalloy René 80 Processed via Laser Powder–Bed Fusion (L-PBF)
2023 Antonio Martelli, Pietro; Sivo, Antonio; Calignano, Flaviana; Bassini, Emilio; Biamino, Sara; Ugues, Daniele
Low-Power Laser Powder Bed Fusion Processing of Scalmalloy®
2022 Martucci, Alessandra; Aversa, Alberta; Manfredi, Diego; Bondioli, Federica; Biamino, Sara; Ugues, Daniele; Lombardi, Mariangela; Fino, Paolo
Hardness Evolution of Solution-Annealed LPBFed Inconel 625 Alloy under Prolonged Thermal Exposure
2022 Marinucci, Fabrizio; Marchese, Giulio; Bassini, Emilio; Aversa, Alberta; Fino, Paolo; Ugues, Daniele; Biamino, Sara
Effects of the solution and first aging treatment applied to as-built and post-HIP CM247 produced via Laser Powder Bed Fusion (LPBF)
2022 Bassini, E.; Sivo, A.; Martelli, P. A.; Rajczak, E.; Marchese, G.; Calignano, F; Biamino, S.; Ugues, D.
Effect of the particle size distribution on physical properties, composition, and quality of gas atomized Astroloy powders for HIP application
2022 Bassini, E.; Galech, U.; Soria, T.; Aristizabal, M.; Iturriza, I.; Biamino, S.; Ugues, D.
On the Formation Mechanism of Banded Microstructures in Electron Beam Melted Ti–48Al–2Cr–2Nb and the Design of Heat Treatments as Remedial Action
2021 Wartbichler, R.; Clemens, H.; Mayer, S.; Ghibaudo, C.; Rizza, G.; Galati, M.; Iuliano, L.; Biamino, S.; Ugues, D.
Anisotropic mechanical and fatigue behaviour of Inconel718 produced by SLM in LCF and high-temperature conditions
2021 Sausto, F.; Marchese, G.; Bassini, E.; Calandri, M.; Biamino, S.; Ugues, D.; Foletti, S.; Beretta, S.
Effetto della pressatura isostatica a caldo (HIP) e del trattamento termico di leghe di Nichel fabbricate via Selective Laser Melting (SLM) = Effect of the Hot Isostatic Pressing (HIP) and heat treatment to nickel-based alloys obtained with Selective Laser Melting (SLM)
2021 Bassini, E.; Sivo, A.; Marchese, G.; Martelli, P.; Calignano, F.; Biamino, S.; Ugues, D.
Failure mode analysis on compression of lattice structures with internal cooling channels produced by laser powder bed fusion
2021 Virgillito, E.; Aversa, A.; Calignano, F.; Lombardi, M.; Manfredi, D.; Ugues, D.; Fino, P.
Assessment of the Hardening Behavior and Tensile Properties of a Cold-Rolled Bainitic–Ferritic Steel
2021 Bassini, Emilio; Sivo, Antonio; Ugues, Daniele
Effect of heat treatments on the microstructure of Inconel 939 alloy processed by laser powder bed fusion
2020 Marchese, G.; Parizia, S.; Saboori, A.; Bassini, E.; Manfredi, D.; Lombardi, M.; Ugues, D.; Biamino, S.
Influence of the Process Parameters on the Densification and Microstructure of Ni-based Superalloys with Different Amount of γ′ Former Alloying Elements Processed by SLM
2020 Marchese, Giulio; Parizia, Simone; Sivo, Antonio; Bassini, Emilio; Calignano, Flaviana; Biamino, Sara; Ugues, Daniele
Assessment of the reinforcing system and carbides evolution in hot isostatically pressed astroloy after prolonged exposure at 820°C
2020 Bassini, E.; Basile, G.; Marchese, G.; Lorusso, M.; Lombardi, M.; Picque, B.; Biamino, S.; Ugues, D.
The role of texturing and microstructure evolution on the tensile behavior of heat-treated Inconel 625 produced via laser powder bed fusion
2020 Marchese, G.; Parizia, S.; Rashidi, M.; Saboori, A.; Manfredi, D.; Ugues, D.; Lombardi, M.; Hryha, E.; Biamino, S.
The influence of the process parameters on the densification and microstructure development of laser powder bed fused Inconel 939
2020 Marchese, G.; Parizia, S.; Saboori, A.; Manfredi, D.; Lombardi, M.; Fino, P.; Ugues, D.; Biamino, S.
Role of the chemical homogenization on the microstructural and mechanical evolution of prolonged heat-treated laser powder bed fused Inconel 625
2020 Marchese, G.; Bassini, E.; Parizia, S.; Manfredi, D.; Ugues, D.; Lombardi, M.; Fino, P.; Biamino, S.
Instrumented Indentation Test: Contact Stiffness Evaluation in the Nano‑range
2019 Maculotti, Giacomo; Genta, Gianfranco; Lorusso, Massimo; Pavese, Matteo; Ugues, Daniele; Galetto, Maurizio
Ottimizzazione dei parametri di processo e cenni sui trattamenti termici per la realizzazione di componenti in Inconel 625 e 718 via Selective Laser Melting (SLM)
2019 Bassini, E.; Calandri, M.; Parizia, S.; Marchese, G.; Biamino, S.; Ugues, D.
Effect of heat treatment on microstructural evolution of additively manufactured Inconel 718 and cast alloy
2019 Saboori, Abdollah; Marchese, Giulio; Aversa, Alberta; Bassini, Emilio; Mazzucato, Federico; Valente, Anna; Lombardi, Mariangela; Ugues, Daniele; Biamino, Sara; Fino, Paolo
| Citazione | Data di pubblicazione | Autori | File |
|---|---|---|---|
| Characterization and validation of a miniaturized steelmaking process for the fabrication of hot work tool steel / Zago, A; Ugues, Daniele; Rosso, M.. - (In corso di stampa). ((Intervento presentato al convegno Tool 2009 Conference tenutosi a Aachen, Germany nel 2nd-4th June 2009. | In corso di stampa | ZAGO AUGUES, Daniele + | - |
| Parameters Optimization and Repeatability Study on Low-Weldable Nickel-Based Superalloy René 80 Processed via Laser Powder–Bed Fusion (L-PBF) / Antonio Martelli, Pietro; Sivo, Antonio; Calignano, Flaviana; Bassini, Emilio; Biamino, Sara; Ugues, Daniele. - In: METALS. - ISSN 2075-4701. - 13:2(2023), p. 210. [10.3390/met13020210] | 1-gen-2023 | Antonio SivoFlaviana CalignanoEmilio BassiniSara BiaminoDaniele Ugues + | metals-13-00210-v2(1)_compressed(1).pdf |
| Low-Power Laser Powder Bed Fusion Processing of Scalmalloy® / Martucci, Alessandra; Aversa, Alberta; Manfredi, Diego; Bondioli, Federica; Biamino, Sara; Ugues, Daniele; Lombardi, Mariangela; Fino, Paolo. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 15:9(2022), p. 3123. [10.3390/ma15093123] | 1-gen-2022 | Martucci, AlessandraAversa, AlbertaManfredi, DiegoBondioli, FedericaBiamino, SaraUgues, DanieleLombardi, MariangelaFino, Paolo | materials-15-03123-v2 (1).pdf |
| Hardness Evolution of Solution-Annealed LPBFed Inconel 625 Alloy under Prolonged Thermal Exposure / Marinucci, Fabrizio; Marchese, Giulio; Bassini, Emilio; Aversa, Alberta; Fino, Paolo; Ugues, Daniele; Biamino, Sara. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 12:11(2022), p. 1916. [10.3390/met12111916] | 1-gen-2022 | Marinucci, FabrizioMarchese, GiulioBassini, EmilioAversa, AlbertaFino, PaoloUgues, DanieleBiamino, Sara | metals-12-01916.pdf |
| Effects of the solution and first aging treatment applied to as-built and post-HIP CM247 produced via Laser Powder Bed Fusion (LPBF) / Bassini, E.; Sivo, A.; Martelli, P. A.; Rajczak, E.; Marchese, G.; Calignano, F; Biamino, S.; Ugues, D.. - In: JOURNAL OF ALLOYS AND COMPOUNDS. - ISSN 0925-8388. - ELETTRONICO. - (2022), p. 164213. [10.1016/j.jallcom.2022.164213] | 1-gen-2022 | Bassini, E.Sivo, A.Martelli, P. A.Rajczak, E.Marchese, G.Calignano, FBiamino, S.Ugues, D. | pagination_JALCOM_164213.pdf; 1-s2.0-S0925838822006041-main.pdf |
| Effect of the particle size distribution on physical properties, composition, and quality of gas atomized Astroloy powders for HIP application / Bassini, E.; Galech, U.; Soria, T.; Aristizabal, M.; Iturriza, I.; Biamino, S.; Ugues, D.. - In: JOURNAL OF ALLOYS AND COMPOUNDS. - ISSN 0925-8388. - ELETTRONICO. - 890:(2022), p. 161631. [10.1016/j.jallcom.2021.161631] | 1-gen-2022 | Bassini, E.Biamino, S.Ugues, D. + | pagination_JALCOM_161631.pdf; pdfresizer.com-pdf-resize.pdf |
| On the Formation Mechanism of Banded Microstructures in Electron Beam Melted Ti–48Al–2Cr–2Nb and the Design of Heat Treatments as Remedial Action / Wartbichler, R.; Clemens, H.; Mayer, S.; Ghibaudo, C.; Rizza, G.; Galati, M.; Iuliano, L.; Biamino, S.; Ugues, D.. - In: ADVANCED ENGINEERING MATERIALS. - ISSN 1527-2648. - ELETTRONICO. - 23:12(2021), p. 2101199. [10.1002/adem.202101199] | 1-gen-2021 | Ghibaudo C.Rizza G.Galati M.Iuliano L.Biamino S.Ugues D. + | Adv Eng Mater - 2021 - Wartbichler - On the Formation Mechanism of Banded Microstructures in Electron Beam Melted Ti 48Al.pdf |
| Anisotropic mechanical and fatigue behaviour of Inconel718 produced by SLM in LCF and high-temperature conditions / Sausto, F.; Marchese, G.; Bassini, E.; Calandri, M.; Biamino, S.; Ugues, D.; Foletti, S.; Beretta, S.. - In: FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES. - ISSN 8756-758X. - 44:1(2021), pp. 271-292. [10.1111/ffe.13373] | 1-gen-2021 | Marchese G.Bassini E.Calandri M.Biamino S.Ugues D. + | ffe.13373(1)_compressed.pdf; pdf accettato.pdf |
| Effetto della pressatura isostatica a caldo (HIP) e del trattamento termico di leghe di Nichel fabbricate via Selective Laser Melting (SLM) = Effect of the Hot Isostatic Pressing (HIP) and heat treatment to nickel-based alloys obtained with Selective Laser Melting (SLM) / Bassini, E.; Sivo, A.; Marchese, G.; Martelli, P.; Calignano, F.; Biamino, S.; Ugues, D.. - In: LA METALLURGIA ITALIANA. - ISSN 0026-0843. - ELETTRONICO. - 113:2(2021), pp. 65-73. | 1-gen-2021 | Bassini E.Sivo A.Marchese G.Martelli P.Calignano F.Biamino S.Ugues D. | ugues.pdf |
| Failure mode analysis on compression of lattice structures with internal cooling channels produced by laser powder bed fusion / Virgillito, E.; Aversa, A.; Calignano, F.; Lombardi, M.; Manfredi, D.; Ugues, D.; Fino, P.. - In: ADVANCES IN MANUFACTURING. - ISSN 2095-3127. - ELETTRONICO. - (2021). [10.1007/s40436-021-00348-z] | 1-gen-2021 | Virgillito E.Aversa A.Calignano F.Lombardi M.Manfredi D.Ugues D.Fino P. | 2021_Virgillito_Failure mode analysis on compression of lattice structures with internal cooling channels produced by laser powder bed fusion.pdf |
| Assessment of the Hardening Behavior and Tensile Properties of a Cold-Rolled Bainitic–Ferritic Steel / Bassini, Emilio; Sivo, Antonio; Ugues, Daniele. - In: MATERIALS. - ISSN 1996-1944. - ELETTRONICO. - 14:21(2021), p. 6662. [10.3390/ma14216662] | 1-gen-2021 | Emilio BassiniAntonio SivoDaniele Ugues | materials-14-06662-v2.pdf; pdfresizer.com-pdf-resize.pdf |
| Effect of heat treatments on the microstructure of Inconel 939 alloy processed by laser powder bed fusion / Marchese, G.; Parizia, S.; Saboori, A.; Bassini, E.; Manfredi, D.; Lombardi, M.; Ugues, D.; Biamino, S.. - (2020). ((Intervento presentato al convegno European Powder Metallurgy Congress and Exhibition, Euro PM 2020 nel 2020. | 1-gen-2020 | Marchese G.Parizia S.Saboori A.Bassini E.Manfredi D.Lombardi M.Ugues D.Biamino S. | Marchese et al. EUROPM2020.pdf |
| Influence of the Process Parameters on the Densification and Microstructure of Ni-based Superalloys with Different Amount of γ′ Former Alloying Elements Processed by SLM / Marchese, Giulio; Parizia, Simone; Sivo, Antonio; Bassini, Emilio; Calignano, Flaviana; Biamino, Sara; Ugues, Daniele. - ELETTRONICO. - (2020). ((Intervento presentato al convegno TMS 2020 Annual Meeting & Exhibition tenutosi a San Diego (CA) nel February 23-27, 2020 [10.5281/zenodo.4153367]. | 1-gen-2020 | Giulio MarcheseSimone PariziaAntonio SivoEmilio BassiniFlaviana CalignanoSara BiaminoDaniele Ugues | TMS_Antonio-Sivo.pdf |
| Assessment of the reinforcing system and carbides evolution in hot isostatically pressed astroloy after prolonged exposure at 820°C / Bassini, E.; Basile, G.; Marchese, G.; Lorusso, M.; Lombardi, M.; Picque, B.; Biamino, S.; Ugues, D.. - In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. - ISSN 0921-5093. - ELETTRONICO. - 773:(2020), p. 138879. [10.1016/j.msea.2019.138879] | 1-gen-2020 | Bassini E.Marchese G.Lombardi M.Biamino S.Ugues D. + | Bassini et al.1-s2.0-S0921509319316594-main.pdf |
| The role of texturing and microstructure evolution on the tensile behavior of heat-treated Inconel 625 produced via laser powder bed fusion / Marchese, G.; Parizia, S.; Rashidi, M.; Saboori, A.; Manfredi, D.; Ugues, D.; Lombardi, M.; Hryha, E.; Biamino, S.. - In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. - ISSN 0921-5093. - ELETTRONICO. - 769:(2020), p. 138500. [10.1016/j.msea.2019.138500] | 1-gen-2020 | Marchese G.Parizia S.Saboori A.Manfredi D.Ugues D.Lombardi M.Biamino S. + | 1-s2.0-S0921509319312869-main.pdf; 1-s2.0-S0921509319312869-mmc1 (1).docx; ACCEPTED VERSION_The role of texturing and microstructure evolution on the tensile behavior of heat-treated Inconel 625 produced via laser powder bed fusion.pdf |
| The influence of the process parameters on the densification and microstructure development of laser powder bed fused Inconel 939 / Marchese, G.; Parizia, S.; Saboori, A.; Manfredi, D.; Lombardi, M.; Fino, P.; Ugues, D.; Biamino, S.. - In: METALS. - ISSN 2075-4701. - ELETTRONICO. - 10:882(2020), pp. 1-19. [10.3390/met10070882] | 1-gen-2020 | Marchese G.Parizia S.Saboori A.Manfredi D.Lombardi M.Fino P.Ugues D.Biamino S. | 2020_Marchese et al. metals-10-00882-v2 (1).pdf |
| Role of the chemical homogenization on the microstructural and mechanical evolution of prolonged heat-treated laser powder bed fused Inconel 625 / Marchese, G.; Bassini, E.; Parizia, S.; Manfredi, D.; Ugues, D.; Lombardi, M.; Fino, P.; Biamino, S.. - In: MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. - ISSN 0921-5093. - ELETTRONICO. - 796:(2020), p. 140007. [10.1016/j.msea.2020.140007] | 1-gen-2020 | Marchese G.Bassini E.Parizia S.Manfredi D.Ugues D.Lombardi M.Fino P.Biamino S. | POST-PRINT VERSION- Role of the chemical homogenization on the microstructural and mechanical evolution of prolonged heat-treated laser powder bed fused Inconel 625.pdf; pdfresizer.com-pdf-resize.pdf |
| Instrumented Indentation Test: Contact Stiffness Evaluation in the Nano‑range / Maculotti, Giacomo; Genta, Gianfranco; Lorusso, Massimo; Pavese, Matteo; Ugues, Daniele; Galetto, Maurizio. - In: NANOMANUFACTURING AND METROLOGY. - ISSN 2520-8128. - STAMPA. - 2:1(2019), pp. 16-25. [10.1007/s41871-018-0030-y] | 1-gen-2019 | Giacomo MaculottiGianfranco GentaMassimo LorussoMatteo PaveseDaniele UguesMaurizio Galetto | - |
| Ottimizzazione dei parametri di processo e cenni sui trattamenti termici per la realizzazione di componenti in Inconel 625 e 718 via Selective Laser Melting (SLM) / Bassini, E.; Calandri, M.; Parizia, S.; Marchese, G.; Biamino, S.; Ugues, D.. - In: LA METALLURGIA ITALIANA. - ISSN 0026-0843. - 6:(2019), pp. 48-54. | 1-gen-2019 | E. BassiniM. CalandriS. PariziaG. MarcheseS. BiaminoD. Ugues | - |
| Effect of heat treatment on microstructural evolution of additively manufactured Inconel 718 and cast alloy / Saboori, Abdollah; Marchese, Giulio; Aversa, Alberta; Bassini, Emilio; Mazzucato, Federico; Valente, Anna; Lombardi, Mariangela; Ugues, Daniele; Biamino, Sara; Fino, Paolo. - CD-ROM. - (2019), pp. 1-6. ((Intervento presentato al convegno EuroPM 2019 tenutosi a Maastricht nel 13-17 October 2019. | 1-gen-2019 | Abdollah SabooriGiulio MarcheseAlberta AversaEmilio BassiniMariangela LombardiDaniele UguesSara BiaminoPaolo Fino + | FEPMA-PM2019-4348825-2-F1-4348825-Manuscript-Heat_treatment_of_IN718_Final_PV_Revised.pdf |