Sfoglia per Autore
Measurement noise of a point autofocus surface topography instrument
2017 Xiaobing, Feng; Quagliotti, Danilo; Maculotti, Giacomo; Syam, Wahyudin P.; Guido, Tosello; Hansen, Hans N.; Galetto, Maurizio; Richard, Leach
Instrumented indentation test: Contact stiffness evaluation in the nano-range
2018 Maculotti, Giacomo; Genta, Gianfranco; Lorusso, Massimo; Pavese, Matteo; Ugues, Daniele; Galetto, Maurizio
Effect of contact stiffness and machine calibration in nano-indentation testing
2018 Genta, Gianfranco; Maculotti, Giacomo; Barbato, Giulio; Levi, Raffaello; Galetto, Maurizio
Measurement noise evaluation, noise bandwidth specification and temperature effects in 3D point autofocusing microscopy
2018 Maculotti, Giacomo; Feng, Xiaobing; Galetto, Maurizio; Leach, Richard
Noise evaluation of a point autofocus surface topography measuring instrument
2018 Maculotti, Giacomo; Feng, Xiaobing; Galetto, Maurizio; Leach, Richard
Monte Carlo estimation of calibration uncertainty for Instrumented Indentation testing machines
2019 Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio
Multi-sensor data fusion for the characterisation of laser cladded cermet coatings
2019 Maculotti, G.; Senin, N.; Oyelola, O.; Galetto, M.; Clare, A.; Leach, R.
Residual flatness and scale calibration for a point autofocus surface topography measuring instrument
2019 Maculotti, Giacomo; Feng, Xiaobing; Su, Rong; Galetto, Maurizio; Leach, Richard
Comparison of calibration methods for nano-indentation testing machines
2019 Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio
Assessment of heat treatment effect on AlSi10Mg by selective laser melting through indentation testing
2019 Maculotti, G.; Genta, G.; Lorusso, M.; Galetto, M.
Instrumented Indentation Test: Contact Stiffness Evaluation in the Nano‑range
2019 Maculotti, Giacomo; Genta, Gianfranco; Lorusso, Massimo; Pavese, Matteo; Ugues, Daniele; Galetto, Maurizio
Instrumented Indentation Test in the Nano‑range: Performances Comparison of Testing Machines Calibration Methods
2019 Galetto, Maurizio; Maculotti, Giacomo; Genta, Gianfranco; Barbato, Giulio; Levi, Raffaello
Single-step calibration method for nano indentation testing machines
2020 Galetto, Maurizio; Genta, Gianfranco; Maculotti, Giacomo
Criticalities of iterative calibration procedures for indentation testing machines in the nano-range
2020 Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio
Defect Probability Estimation for Hardness-Optimised Parts by Selective Laser Melting
2020 Galetto, Maurizio; Genta, Gianfranco; Maculotti, Giacomo; Verna, Elisa
Analysis of residual plastic deformation of blanked sheets out of automotive aluminium alloys through hardness map
2021 Maculotti, G; Bonù, S; Bonù, L; Cagliero, R; Genta, G; Marchiandi, G; Galetto, M
Uncertainty estimation by bootstrap sampling of area shape function in nano-indentation testing
2021 Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio
Uncertainty evaluation of small wear measurements on complex technological surfaces by machine vision-aided topographical methods
2021 Genta, G.; Maculotti, G.
Effect of track geometry on the measurement uncertainty of wear in pin-on-disc tribological test
2021 Maculotti, G.; Goti, E.; Genta, G.; Marchiandi, G.; Mura, A.; Mazza, L.; Galetto, M.
Inference on errors in industrial parts: Kriging and variogram versus geometrical product specifications standard
2021 Maculotti, G.; Pistone, G.; Vicario, G.
Citazione | Data di pubblicazione | Autori | File |
---|---|---|---|
Measurement noise of a point autofocus surface topography instrument / Xiaobing, Feng; Quagliotti, Danilo; Maculotti, Giacomo; Syam, Wahyudin P.; Guido, Tosello; Hansen, Hans N.; Galetto, Maurizio; Richard, Leach. - STAMPA. - (2017). (Intervento presentato al convegno 2017 International Conference on Metrology and Properties of Engineering Surfaces tenutosi a Göteborg (Sweden) nel June 26-29 2017). | 1-gen-2017 | QUAGLIOTTI, DANILOMACULOTTI, GIACOMOMaurizio Galetto + | - |
Instrumented indentation test: Contact stiffness evaluation in the nano-range / Maculotti, Giacomo; Genta, Gianfranco; Lorusso, Massimo; Pavese, Matteo; Ugues, Daniele; Galetto, Maurizio. - ELETTRONICO. - Proceedings of the 6th International conference on nanoManufacturing:(2018), pp. 675-682. (Intervento presentato al convegno 6th International Conference on nanoManufacturing tenutosi a London (UK) nel 4-6 July 2018). | 1-gen-2018 | Giacomo MaculottiGianfranco GentaMassimo LorussoMatteo PaveseDaniele UguesMaurizio Galetto | Paper 72_new template.pdf |
Effect of contact stiffness and machine calibration in nano-indentation testing / Genta, Gianfranco; Maculotti, Giacomo; Barbato, Giulio; Levi, Raffaello; Galetto, Maurizio. - ELETTRONICO. - 78:(2018), pp. 208-212. (Intervento presentato al convegno 6th CIRP Global Web Conference “Envisaging the future manufacturing, design, technologies and systems in innovation era” tenutosi a Shantou (Cina) nel 23-25 ottobre 2018) [10.1016/j.procir.2018.08.313]. | 1-gen-2018 | Gianfranco GentaGiacomo MaculottiGiulio BarbatoRaffaello LeviMaurizio Galetto | - |
Measurement noise evaluation, noise bandwidth specification and temperature effects in 3D point autofocusing microscopy / Maculotti, Giacomo; Feng, Xiaobing; Galetto, Maurizio; Leach, Richard. - ELETTRONICO. - (2018), pp. 155-156. (Intervento presentato al convegno 18th international conference of the european society for precision engineering and nanotechnology tenutosi a Venezia (ITA) nel 4-8 June 2018). | 1-gen-2018 | Giacomo MaculottiMaurizio Galetto + | ExtendedAbstract_ICE18156_1218093830.pdf |
Noise evaluation of a point autofocus surface topography measuring instrument / Maculotti, Giacomo; Feng, Xiaobing; Galetto, Maurizio; Leach, Richard. - In: MEASUREMENT SCIENCE & TECHNOLOGY. - ISSN 0957-0233. - ELETTRONICO. - 29:6(2018), p. 065008. [10.1088/1361-6501/aab528] | 1-gen-2018 | Maculotti, GiacomoGaletto, Maurizio + | Maculotti_2018_Meas._Sci._Technol._29_065008.pdf |
Monte Carlo estimation of calibration uncertainty for Instrumented Indentation testing machines / Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio. - ELETTRONICO. - (2019), pp. 14-15. (Intervento presentato al convegno Mathematical and Statistical Methods for Metrology tenutosi a Torino (ITA) nel 30-31 May 2019). | 1-gen-2019 | Giacomo MaculottiGianfranco GentaMaurizio Galetto | - |
Multi-sensor data fusion for the characterisation of laser cladded cermet coatings / Maculotti, G.; Senin, N.; Oyelola, O.; Galetto, M.; Clare, A.; Leach, R.. - (2019), pp. 260-263. (Intervento presentato al convegno 19th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2019 tenutosi a Bilbao, Spain nel 2019). | 1-gen-2019 | Maculotti G.Galetto M. + | - |
Residual flatness and scale calibration for a point autofocus surface topography measuring instrument / Maculotti, Giacomo; Feng, Xiaobing; Su, Rong; Galetto, Maurizio; Leach, Richard. - In: MEASUREMENT SCIENCE & TECHNOLOGY. - ISSN 0957-0233. - STAMPA. - 30:(2019), p. 075005. [10.1088/1361-6501/ab188f] | 1-gen-2019 | Giacomo MaculottiMaurizio Galetto + | Maculotti_2019_Meas._Sci._Technol._30_075005.pdf |
Comparison of calibration methods for nano-indentation testing machines / Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio. - ELETTRONICO. - (2019), pp. 1-10. (Intervento presentato al convegno XIV Convegno dell'Associazione Italiana Tecnologie Manifatturiere tenutosi a Padova nel 9-11 Settembre 2019). | 1-gen-2019 | Giacomo MaculottiGianfranco GentaMaurizio Galetto | - |
Assessment of heat treatment effect on AlSi10Mg by selective laser melting through indentation testing / Maculotti, G.; Genta, G.; Lorusso, M.; Galetto, M.. - 813:(2019), pp. 171-177. (Intervento presentato al convegno 33rd Surface Modification Technologies Conference (SMT 33)) [10.4028/www.scientific.net/KEM.813.171]. | 1-gen-2019 | Maculotti G.Genta G.Lorusso M.Galetto M. | - |
Instrumented Indentation Test: Contact Stiffness Evaluation in the Nano‑range / Maculotti, Giacomo; Genta, Gianfranco; Lorusso, Massimo; Pavese, Matteo; Ugues, Daniele; Galetto, Maurizio. - In: NANOMANUFACTURING AND METROLOGY. - ISSN 2520-8128. - STAMPA. - 2:1(2019), pp. 16-25. [10.1007/s41871-018-0030-y] | 1-gen-2019 | Giacomo MaculottiGianfranco GentaMassimo LorussoMatteo PaveseDaniele UguesMaurizio Galetto | Maculotti2019_Article_InstrumentedIndentationTestCon.pdf |
Instrumented Indentation Test in the Nano‑range: Performances Comparison of Testing Machines Calibration Methods / Galetto, Maurizio; Maculotti, Giacomo; Genta, Gianfranco; Barbato, Giulio; Levi, Raffaello. - In: NANOMANUFACTURING AND METROLOGY. - ISSN 2520-8128. - STAMPA. - 2:2(2019), pp. 91-99. [10.1007/s41871-019-00035-5] | 1-gen-2019 | Maurizio GalettoGiacomo MaculottiGianfranco GentaGiulio BarbatoRaffaello Levi | - |
Single-step calibration method for nano indentation testing machines / Galetto, Maurizio; Genta, Gianfranco; Maculotti, Giacomo. - In: CIRP ANNALS. - ISSN 0007-8506. - ELETTRONICO. - 69:(2020), pp. 429-432. [10.1016/j.cirp.2020.03.015] | 1-gen-2020 | Maurizio GalettoGianfranco GentaGiacomo Maculotti | Galetto_et_al_CIRP_2020.pdf |
Criticalities of iterative calibration procedures for indentation testing machines in the nano-range / Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio. - ELETTRONICO. - (2020). (Intervento presentato al convegno 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020). | 1-gen-2020 | Giacomo MaculottiGianfranco GentaMaurizio Galetto | ExtendedAbstract_ICE20146_0309010529.pdf |
Defect Probability Estimation for Hardness-Optimised Parts by Selective Laser Melting / Galetto, Maurizio; Genta, Gianfranco; Maculotti, Giacomo; Verna, Elisa. - In: INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING. - ISSN 2234-7593. - 21:9(2020), pp. 1739-1753. [10.1007/s12541-020-00381-1] | 1-gen-2020 | Galetto, MaurizioGenta, GianfrancoMaculotti, GiacomoVerna, Elisa | Galetto2020_Article_DefectProbabilityEstimationSLM_IJPEM.pdf; Manuscript_JPEM-D-20-00129_versione finale.pdf |
Analysis of residual plastic deformation of blanked sheets out of automotive aluminium alloys through hardness map / Maculotti, G; Bonù, S; Bonù, L; Cagliero, R; Genta, G; Marchiandi, G; Galetto, M. - In: IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING. - ISSN 1757-8981. - ELETTRONICO. - 1193:1(2021), p. 012102. [10.1088/1757-899X/1193/1/012102] | 1-gen-2021 | Maculotti, GGenta, GMarchiandi, GGaletto, M + | 2021_Maculotti_et_al_IOP_Conf._Ser.__Mater._Sci._Eng._Blanking_HV.pdf |
Uncertainty estimation by bootstrap sampling of area shape function in nano-indentation testing / Maculotti, Giacomo; Genta, Gianfranco; Galetto, Maurizio. - (2021), pp. 69-70. (Intervento presentato al convegno Joint Virtual Workshop of ENBIS and MATHMET - Mathematical and Statistical Methods for Metrology MSMM 2021 tenutosi a Torino (ITA) nel 31 May - 1 June 2021). | 1-gen-2021 | Maculotti, GiacomoGenta, GianfrancoGaletto, Maurizio | 2021_Maculotti_ENBIS_MATHMET.pdf |
Uncertainty evaluation of small wear measurements on complex technological surfaces by machine vision-aided topographical methods / Genta, G.; Maculotti, G.. - In: CIRP ANNALS. - ISSN 0007-8506. - ELETTRONICO. - 70:1(2021), pp. 451-454. [10.1016/j.cirp.2021.04.057] | 1-gen-2021 | Genta G.Maculotti G. | 1-s2.0-S0007850621000810-main.pdf |
Effect of track geometry on the measurement uncertainty of wear in pin-on-disc tribological test / Maculotti, G.; Goti, E.; Genta, G.; Marchiandi, G.; Mura, A.; Mazza, L.; Galetto, M.. - ELETTRONICO. - (2021), pp. 293-296. (Intervento presentato al convegno 21st International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2021 nel 2021). | 1-gen-2021 | Maculotti G.Goti E.Genta G.Marchiandi G.Mura A.Mazza L.Galetto M. | 2021_Maculotti_Euspen2021.pdf |
Inference on errors in industrial parts: Kriging and variogram versus geometrical product specifications standard / Maculotti, G.; Pistone, G.; Vicario, G.. - In: APPLIED STOCHASTIC MODELS IN BUSINESS AND INDUSTRY. - ISSN 1524-1904. - ELETTRONICO. - (2021). [10.1002/asmb.2603] | 1-gen-2021 | Maculotti G.Vicario G. + | 2021_Maculotti_Kriging_ASMBI.pdf; ASMB-20-191.R2.pdf |
Legenda icone
- file ad accesso aperto
- file disponibili sulla rete interna
- file disponibili agli utenti autorizzati
- file disponibili solo agli amministratori
- file sotto embargo
- nessun file disponibile